Page 45 of 48 FirstFirst ... 354344454647 ... LastLast
Results 441 to 450 of 479

Thread: G28 - Simple Mans, Simple REDO of an G28 LP640

  1. #441
    Senior Member
    Join Date
    Aug 2015
    Posts
    380
    Window motor wiring - My switch went bad and the connector cracked had a 118 mile round trip drive to a pick n pull. loaded all the connectors and switches they had .

    https://youtu.be/yMtoEphTQXU

    Side view mirror - had the thing working weeks ago. spent hours second guessing my catera to feiro to lambo chart. Long story short the wire on the drivers side had been cut by someone Ran some new wires and got them working

    Also added an $8 mirror folding system. Here is a video.

    https://youtu.be/bkCOIkax8fs

    Need to add my interior actuator switch and to solder it all up





    Fiero and Remote lock unlock and folding mirror system



  2. #442
    Senior Member
    Join Date
    Aug 2015
    Posts
    380
    After finishing the door wiring, I moved on to the engine.

    A shift system was purchased from Joe the fiero king and installed so you have to depress the brake pedal to before you can push into PNDR. It a nice set up and I'm glad I have it for the build!




  3. #443
    Senior Member
    Join Date
    Aug 2015
    Posts
    380
    With The Fiero Kings shift system in I fired up the engine and it is running rich. Replaced the MAF, TPS and IAC sensors and adjusted the fuel pressure.

    I wanted to run a scan but the Prior Owner removed the ALDL port

    does anyone know the what PIN to wire up the ALDL port There are 4 wires unattached by the PCM






  4. #444
    Senior Member
    Join Date
    Aug 2015
    Posts
    380
    ot a chart from Ryan at Sinister Performance LLC, a very helpful person.

    http://www.gmtuners.com/files/Fiero_L67_PCM_wiring.pdf

    With the PIN layout for for the OBDII port wires.

    PIN 59 Purple wire was one of the cut loose wires
    PIN 15 tan is MIA




  5. #445
    Awesome! great job, u r the man! Best I ever see

  6. #446
    Again hope t c more

  7. #447
    Senior Member
    Join Date
    Aug 2015
    Posts
    380
    Quote Originally Posted by LLLPPP View Post
    Again hope t c more
    thanks LLLPPP!

  8. #448
    Senior Member
    Join Date
    Aug 2015
    Posts
    380
    Well Having been down with injuries to both thumbs for 7 weeks, project REDO has been restarted

    Finished the IDLA port and the wrapping of the wiring harness






  9. #449
    Senior Member
    Join Date
    Aug 2015
    Posts
    380
    started on the engine hatch. The REDOs G28 hatch had seen batter dayz, so I went with an OEM replica.

    The angles on the body are not right. The gap from the hatch to the body is 1/2 inch.

    Fiberglass, and some sanding and the gap is 3/16 of and inch. Will use some dyna glass to dial it in later










  10. #450
    Nice work !!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •