Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: mc14 wing yes the part not the mold foam wing to carbon fiber pics

  1. #1
    aconcepts
    Guest

    mc14 wing yes the part not the mold foam wing to carbon fiber pics

    Here is a pic of the carbon fiber wing I made out of foam
    I changed the sides to match the mc14 and now makein the new base for it








  2. #2
    Senior Member
    Join Date
    Jan 2004
    Location
    Upstate NY
    Posts
    1,066

    Re: mc14 wing yes the part not the mold foam wing to carbon fiber pics

    Are you doing REAL carbon fiber work and how difficult is it??

    Can you do custom CF stuff for other people or just your own??

    Let me know -VK
    Life is too short to be driving Hondas!

  3. #3
    aconcepts
    Guest

    Re: mc14 wing yes the part not the mold foam wing to carbon fiber pics

    I do my own for my car but if you had a part or a mold I could lay it and bake it

  4. #4
    aconcepts
    Guest

    Re: mc14 wing yes the part not the mold foam wing to carbon fiber pics

    it is not hard to lay carbon fiber it is just time consomeing

  5. #5
    Senior Member
    Join Date
    Jan 2004
    Location
    Upstate NY
    Posts
    1,066

    Re: mc14 wing yes the part not the mold foam wing to carbon fiber pics

    I have some interior console pieces I need covered with CF but they are small and made out of hard plastic....What is your recommendation on doing something like this so it "looks" authentic?? Is there a product or way to cover them with an imitation CF sheet??

    I'm sure to lay CF it requires special tools and a way to bake it but I don't have any of that...I would like to get some advise from you so can I contact you for more info?? you can email me a phone number...Or I can email you my cell number if you prefer...

    Let me know - Thanks

    VK
    Life is too short to be driving Hondas!

  6. #6
    aconcepts
    Guest

    Re: mc14 wing yes the part not the mold foam wing to carbon fiber pics

    I also can custom carve a plug

  7. #7
    aconcepts
    Guest

    Re: mc14 wing yes the part not the mold foam wing to carbon fiber pics

    you can call me 623-204-7892

  8. #8
    Senior Member
    Join Date
    Jan 2004
    Location
    Upstate NY
    Posts
    1,066

    Re: mc14 wing yes the part not the mold foam wing to carbon fiber pics

    Thanks!

    I'll be calling you at 10AM EST

    Vasilis K.
    Life is too short to be driving Hondas!

  9. #9
    aconcepts
    Guest

    Re: mc14 wing yes the part not the mold foam wing to carbon fiber pics

    no prob man anytime

  10. #10
    aconcepts
    Guest

    Re: mc14 wing yes the part not the mold foam wing to carbon fiber pics

    v when you are ready to lay the mold get ahold of me I will work you thro it
    remember mold release then gel coat then hand lay fiber glass and roll out all the air under the glass
    then when you have the mold you want to color sand or wet sand with water
    start with 400 and go to 1200 then polish then wax mold realease and polish it out
    good luck man when you get that far let me know

Similar Threads

  1. F40 LM Bi Wing
    By frankf40 in forum Technical Discussion & Question
    Replies: 2
    Last Post: 04-02-2011, 03:17 AM
  2. 2 part pour foam into mold advice
    By MacGyver in forum Technical Discussion & Question
    Replies: 3
    Last Post: 04-05-2010, 08:58 AM
  3. Replies: 8
    Last Post: 04-01-2010, 01:49 PM
  4. carbon fiber wing for the 360
    By aconcepts in forum The Mall
    Replies: 1
    Last Post: 09-10-2005, 10:23 PM
  5. wing for a 355 kit
    By kitcarguy15 in forum General Kitcar Chat
    Replies: 22
    Last Post: 05-16-2005, 04:30 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •