Results 1 to 6 of 6

Thread: Wheel Wells , inner, rear

  1. #1
    Senior Member
    Join Date
    Sep 2008
    Posts
    90

    Wheel Wells , inner, rear

    Anybody interested in a set of these? I am making a mold of them and will pop out a few sets if there is enough interest. $250 for the set. They are for the Diablo and are very wide and need trimmed to fit. The molds i make will be made widder to accomodate a wide range of vehicles. Mucie etc..

    Mike


  2. #2

    Re: Wheel Wells , inner, rear

    It would depend on the price. If they could be easilly fit to a 355, I may be interested.

  3. #3
    Senior Member
    Join Date
    Sep 2008
    Posts
    90

    Re: Wheel Wells , inner, rear

    I am not familiar with the width of the 355, These are very wide and i will make them wider to fit just about any car. The price is in the original post and will lower it when i get 4 or more that are interested.

  4. #4

    Re: Wheel Wells , inner, rear

    Quote Originally Posted by Mbdiablovt
    I am not familiar with the width of the 355, These are very wide and i will make them wider to fit just about any car. The price is in the original post and will lower it when i get 4 or more that are interested.
    Ha! I was working on something else at the same time and must have read right over the price. I will get you the measurements for a 355.

  5. #5

    Re: Wheel Wells , inner, rear

    The wheel wells on a 355 are about 15 to 17 inches deep depending on where you measure and how deep you set them.

  6. #6
    Senior Member
    Join Date
    Sep 2008
    Posts
    90

    Re: Wheel Wells , inner, rear

    These will fit, they are 18 inches wide and need trimming to fit.

Similar Threads

  1. +3" rear bumpstear HT kit and wheel adaptors
    By Whodeanie in forum The Mall
    Replies: 2
    Last Post: 04-30-2010, 07:36 PM
  2. Help!! not sure what to do with the rear bearing / wheel
    By Ferrari Berlinetta in forum Technical Discussion & Question
    Replies: 11
    Last Post: 02-08-2009, 06:57 PM
  3. What are you guys using for inner wheel wells?
    By KillerX in forum Technical Discussion & Question
    Replies: 17
    Last Post: 02-05-2008, 09:49 AM
  4. wheel wells
    By Ferrari Berlinetta in forum Technical Discussion & Question
    Replies: 7
    Last Post: 04-22-2004, 02:30 PM
  5. Wheel wells on replicas
    By MiamiSpyder in forum General Kitcar Chat
    Replies: 4
    Last Post: 06-25-2003, 04:39 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •