Results 1 to 4 of 4

Thread: IN NEED OF PARTS...

  1. #1

    IN NEED OF PARTS...

    Hey if anyone is selling or knows where i can get the following that woulkd be great..
    -cheap cross drilled rotors and brake assembly for front.
    -tubular A arms
    -audi transaxle/transmision
    -wheel spacers, i have a bolt pattern of 5x120 and i need to be able to put my front wheels on with a fiero bolt pattern to about a 2 inch spacer with 5X120 bolt pattern on the end...???
    http://putfile.com/pic.php?pic=5/14115334210.jpg&s=x4

  2. #2
    Senior Member
    Join Date
    May 2003
    Location
    Ontario
    Posts
    412

    Re: IN NEED OF PARTS...

    hey! I think I paid about 40-45 CDN each for my cross drilled roters ill see if i still have the guys info and hook ya up with it
    Brad

  3. #3

    Re: IN NEED OF PARTS...

    thad be great brad, thanks
    http://putfile.com/pic.php?pic=5/14115334210.jpg&s=x4

  4. #4
    Moderator FunnyWheels's Avatar
    Join Date
    Nov 2002
    Location
    Tampa, FL
    Posts
    8,151

    Re: IN NEED OF PARTS...

    I have a source for the spacers. They are Hub Centric and use special studs and lug nuts as well. If your putting them on your car, did you measure the distance between the hub and the back side of the wheel to insure that you need 2 inch spacers. One inch would be better on a Fiero using stock bearings etc.

    Sen me an e-mail at newmdav@ispwest.com and I can send the wheel adapter information to you. Many people on this site have used them with good success.

    Dave
    If you're not confused, you're not paying attention.

Similar Threads

  1. Replies: 1
    Last Post: 02-20-2007, 11:27 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •