Results 1 to 3 of 3

Thread: Wanted: Coil over 'sleeves'

  1. #1
    Senior Member
    Join Date
    Dec 2006
    Posts
    914

    Wanted: Coil over 'sleeves'


    Looking for a set of 2 sleeves for the coil overs I am putting together with KYB struts and 12 in springs. Was about to order the complete 4 set for a CRX off of Ebay, seems to be the cheapest route, other thoughts much appreciated. If anyone has a set that will work let me know.
    ;D
    Thanks for looking,

    Michael
    Building a F40 replica, 4.9 caddy, 5 speed.

  2. #2

    Re: Wanted: Coil over 'sleeves'

    I've got two coilovers that I can let go cheap. They're probably about 1.9" ID ( I can get the exact measurement), so I'm not sure if they'll work for your struts. You'll need to measure. The nut on one is really tight... I think there is a metal burr under it, but if you're interested I'll let you have both for $40 plus shipping. That will also include a set of 350lb springs that came with them.

    Meddle not with the affairs of the Dragon, for you are crunchy... and taste good with ketchup.<br />http://www.rc-sub.com/resources/grap...ni/avatar2.jpg

  3. #3
    Moderator FunnyWheels's Avatar
    Join Date
    Nov 2002
    Location
    Tampa, FL
    Posts
    8,151

    Re: Wanted: Coil over 'sleeves'

    Now that is a real deal. I wish I needed them.

    Dave
    If you're not confused, you're not paying attention.

Similar Threads

  1. LOOKING TO LOWER MY KIT CAR WITH COIL OVERS TO USE?
    By newb123 in forum Technical Discussion & Question
    Replies: 25
    Last Post: 03-27-2010, 03:55 PM
  2. Front Coil Over conversion
    By Don in forum Technical Discussion & Question
    Replies: 73
    Last Post: 01-15-2005, 09:58 PM
  3. Need coil over springs
    By KitMan in forum The Mall
    Replies: 3
    Last Post: 01-11-2004, 12:44 AM
  4. coil over springs
    By KitMan in forum Technical Discussion & Question
    Replies: 3
    Last Post: 12-13-2003, 04:04 PM
  5. New KYB coil over rear struts
    By mikeo in forum The Mall
    Replies: 23
    Last Post: 10-20-2003, 06:32 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •