Search:

Type: Posts; User: Simple Man

Page 1 of 15 1 2 3 4

Search: Search took 0.01 seconds.

  1. Yes, 1/4 inch rubber washers.

    Yes, 1/4 inch rubber washers.
  2. Made a flange on the qtr panel and scoop and...

    Made a flange on the qtr panel and scoop and welded up a frame for the NEW oil cooler and trimmed and fitted the wheel well liner.

    Pretty happy how solid the oil cooler mount is and the way the...
  3. spent most the day working on the floor in a...

    spent most the day working on the floor in a horizontal position

    Did some body work on the rocker and qtr panel as i cut out the G28 rocker /scoop and replaced with OEM replica

    used dyna glass...
  4. Well it looks like I haven't done anything on the...

    Well it looks like I haven't done anything on the car , but a lot of fiddling around with the outer door skin, fiber glassing sand etc to get the side view mirror to mount. I have had this door...
  5. Yes the OEM rocker is waaay better!

    Yes the OEM rocker is waaay better!
  6. thanks man! a slow process, but coming along!

    thanks man! a slow process, but coming along!
  7. Also started on the Install of an OEM fiber glass...

    Also started on the Install of an OEM fiber glass rocker.

    http://lamboclone.com/index.php?action=dlattach;topic=3575.0;attach=28905;image


    ...
  8. While waiting on a cable to do my inner door...

    While waiting on a cable to do my inner door latch release, Fiber glassed the outer door skin in a few needed areas

    The gaps were just to large for just dyna glass

    The bottom of the door was...
  9. Test wired the Cadillac Catera power mirror...

    Test wired the Cadillac Catera power mirror switch to the existing Fiero GT power mirror wiring, then the Murcielago side view mirror.

    https://www.youtube.com/watch?v=xMF2tIBwy9A&feature=youtu.be...
  10. 20below thanks! for some odd reason I love...

    20below thanks! for some odd reason I love working on this project Have no idea when its going to get done, LOL:D
  11. Thanks! G35, A lot going on in the doors!

    Thanks! G35, A lot going on in the doors!
  12. the doors just keep going...

    the doors just keep going http://lamboclone.com/Smileys/default/laughing7.gif and going

    and still there is more to do .....
    ...
  13. back from vaca and on to the REDO...

    back from vaca and on to the REDO http://lamboclone.com/Smileys/default/shocked.gif

    Go figure had a little issue with the fiero wiring for the door locks. Not good to have the 12v supply...
  14. 76, the system I purchased does all I need it to....

    76, the system I purchased does all I need it to. locks, unlocks and flashes parking lights.
    If the China system fails viper is my next option.

    Thks
  15. For the door locks I will be using MES Swiss made...

    For the door locks I will be using MES Swiss made actuators and a cable system rather than a lever system.

    Bought 2 of the same cheap Chinese systems with remote, instructions were lame but got...
  16. Every so slowly !! lol

    Every so slowly !! lol
  17. Cleaned up the window channel inserts and...

    Cleaned up the window channel inserts and reinstalled along with motor and glass.

    Then made bracket for attaching outer window sweep to outer door skin, after modifying the skin a bit

    Pretty...
  18. Re-assembled the door, glass etc and checked fit...

    Re-assembled the door, glass etc and checked fit and function . finalized the welding.

    Took it all apart, metal prepped and painted.

    Fiber glassed in the frame.

    Once it dries re-assemble...
  19. Thanks G35!!

    Thanks G35!!
  20. Took a ton of time to fabricate the handle...

    Took a ton of time to fabricate the handle support.

    I had fond memories of this massive erector set my dad bought me when I was in second grade http://lamboclone.com/Smileys/default/toothy.gif
    ...
  21. The OEM Latch is mounted lower than the G28 latch...

    The OEM Latch is mounted lower than the G28 latch location.

    The engine bonnet release handle had to be moved lower as well.
    ...
  22. Decided to go with the W115 latch, Instead of the...

    Decided to go with the W115 latch, Instead of the W126. Got the OEM measurements from Auto pro as well as a replica upper gasket. Thank you AutoPro!!

    The OEM lower gasket really wont work...
  23. Thanks Shem!!

    Thanks Shem!!
  24. Thanks 2Fast! No progress this week as work...

    Thanks 2Fast! No progress this week as work hasn't gotten in the way :)
  25. A test fit of the door..... skin fits a lot...

    A test fit of the door..... skin fits a lot better. Getting there http://lamboclone.com/Smileys/default/cheesy.gif


    Still have some adjustments to do, really ? ...
Results 1 to 25 of 364
Page 1 of 15 1 2 3 4