Search:

I can. I primarily use my machine for wood and aluminum milling, but I specifically built it to be able to machine foam and epoxy plugs/molds.

That is a pretty good analysis. One thing I might add and may not be an option for what you are trying to do. To make the swap a tiny bit more simple, do this to a car with an AWD/4WD option or a...

That's unfortunate... It's always great reading back through these threads and seeing the development pictures. It really sucks when they disappear! For another option, I am a big fan of the amazon...

This is coming from my limited experience in the E9x BMW chassis and the DSM worlds, it could be totally different on a Porsche transmission. The inputs you are describing as needed are from the...

As long as it uses 12v solenoids to activate the clutch packs, line pressure and torque converter lockup, I don't see why it wouldn't work. You would just need an understanding of which combinations...

I am not familiar with those transmissions, but I am running one of these in my eclipse. Its only a 4 speed, but this is set up to be able to control up to a 6 speed gear box, so I can't imagine why...

Have you thought about going off the less beaten path in terms of V12 engines, like the LS based V12, or the 2JZ based V12? Both of those are probably out of your budget since they are more of a one...

Are you referring to the dash? Is it just a photoshopped picture or something?

Metro, on the sikwhips site they are showing a digital dash. Any idea what that is and if its available for purchase somewhere?

The side view looks great. Are you able to to the same to the front and top views so see the angle of the MR2 windscreen looking head on?

Is foam strong enough to pull a mold directly from? I havent done it yet, but I had read that the foam should to be coated with a hard shell like an epoxy so it doesn't deform when the fiberglass is...

Agreed, I too would love to hear about the process/pitfalls before I step into the deep end. Maybe a youtube video discussing it would be somewhat easy!

Hey I know that car's designer! He made that model about 5 years ago now I think.

I know there has been a few threads on AWD already and most people have seem to given up on AWD because it was too complicated, but I had an idea that I cannot seem to shake until I at least talk to...

Hey guys, havent been active here for quite awhile! I am finally getting ready to make a 1/5 scale model using 1/2" thick sheets of Extruded Polystyrene all sandwiched together. I have a stack of 80...

Hughes, I have tried to contacting him a few times after our first discussion about chassis design. I just need an update if he is still interested in helping us or not. Does anyone know if he is...

Hey guys, I am back after designing and thinking what I want for quite awhile. I finally think I am at a point where I can show my progress of my updated design. I hope some of you remember my posts...