Search:

Type: Posts; User: Simple Man

Page 1 of 16 1 2 3 4

Search: Search took 0.02 seconds.

  1. Applied some rage gold. Maybe be a bit to much...

    Applied some rage gold. Maybe be a bit to much as I sanded off a ton of http://lamboclone.com/Smileys/default/laughing7.gif

    Second time applying did a better job and focused on one side. ...
  2. Added Dura Glass to the top side of the engine...

    Added Dura Glass to the top side of the engine bonnet, to get it flush with the body, and also fixed the gap.

    Ground down through the reverse side, through the two layers of the bonnet to the...
  3. 20below, Bloozberry and Fakerari, Thanks for the...

    20below, Bloozberry and Fakerari, Thanks for the comments guys, As you know just keep plugging away and maybe the car will be done in about 5 years!!
  4. Major milestone of the REDO, Actually drove the...

    Major milestone of the REDO, Actually drove the car in and out of the shop http://lamboclone.com/Smileys/default/toothy.gif

    Cleaned up the shop, and will cut the passenger door skin off, so I can...
  5. thanks 275NART!

    thanks 275NART!
  6. Thank G35 Mike, I just keep plugging away :D

    Thank G35 Mike, I just keep plugging away :D
  7. Made some brackets to mount the bat wings to the...

    Made some brackets to mount the bat wings to the body.

    Got the actuators installed and the bat wings go up and down with the engine bonnet closed. The actuators hold the bat wings nice and firm...
  8. Made a plug and then a mold for the rear spoiler...

    Made a plug and then a mold for the rear spoiler and started on the recessed area on the rear trunk.

    Over all pretty happy with the part



    completed mold...
  9. thanks for the comments guys , these builds have...

    thanks for the comments guys , these builds have varied meanings to people, main things is to enjoy!
  10. G35, thanks for the comments. I don't think...

    G35, thanks for the comments. I don't think about the past or the future, mainly just living in the moment enjoying working on the REDO. Call me crazy but Im getting my monies worth right now with...
  11. what a yawner on the REDO today, did some...

    what a yawner on the REDO today, did some fiberglass repair, Wash, rinse, sand, acetone, tin foil etc. on the rear trunk lid and hacked up body
    ...
  12. The REDO's rear trunk lid needed a bit of...

    The REDO's rear trunk lid needed a bit of cleaning up

    http://lamboclone.com/index.php?action=dlattach;topic=3575.0;attach=29321;image
    ...
  13. made a bracket for the engine bonnet latch ...

    made a bracket for the engine bonnet latch

    http://lamboclone.com/index.php?action=dlattach;topic=3575.0;attach=29311;image
    ...
  14. Continued on the rear hatch. Made some...

    Continued on the rear hatch. Made some adjustments to the hinge mounting

    Ground at least 1/4 of rage bondo that the PO applied and got the hatch to line up with the body on both sides
    ...
  15. Laid out some string to check the lines from roof...

    Laid out some string to check the lines from roof over the engine bonnet to the body in the rear.

    I was off by a 5/16 of an inch and finally figured out where. The two cut grooves in the body...
  16. thanks man!

    thanks man!
  17. Had to increase the length of the OEM sized...

    Had to increase the length of the OEM sized Replica bat wings.

    The bat wings that came with the REDO were pretty pitiful
    ...
  18. Was up late last night fiber glassing. Got an...

    Was up late last night fiber glassing. Got an early start today

    The top of the engine bonnet is 1/2 " wider at the top than the bottom. Added CSM to make the distance the same.

    Will need to...
  19. happy Friday! The OEM engine bonnet is is...

    happy Friday!

    The OEM engine bonnet is is about 2 2/16" to short.

    Time to cut and fiberglass! Multiple times!! http://lamboclone.com/Smileys/default/toothy.gif
    ...
  20. For the engine bonnet hinge, I looked at Autpro...

    For the engine bonnet hinge, I looked at Autpro and USMC butler build threads for some ideas, as well as some pictures of Murci-Me car.

    I cut the old rusted inch tubing out. I took an Audi A-4...
  21. started on the engine hatch. The REDOs G28 hatch...

    started on the engine hatch. The REDOs G28 hatch had seen batter dayz, so I went with an OEM replica.

    The angles on the body are not right. The gap from the hatch to the body is 1/2 inch.
    ...
  22. Well Having been down with injuries to both...

    Well Having been down with injuries to both thumbs for 7 weeks, project REDO has been restarted http://lamboclone.com/Smileys/default/usa.gif

    Finished the IDLA port and the wrapping of the wiring...
  23. thanks LLLPPP!

    thanks LLLPPP!
  24. ot a chart from Ryan at Sinister Performance LLC,...

    ot a chart from Ryan at Sinister Performance LLC, a very helpful person.

    http://www.gmtuners.com/files/Fiero_L67_PCM_wiring.pdf

    With the PIN layout for for the OBDII port wires.

    PIN 59...
  25. With The Fiero Kings shift system in I fired up...

    With The Fiero Kings shift system in I fired up the engine and it is running rich. Replaced the MAF, TPS and IAC sensors and adjusted the fuel pressure.

    I wanted to run a scan but the Prior Owner...
Results 1 to 25 of 392
Page 1 of 16 1 2 3 4