Search:

Type: Posts; User: Simple Man

Page 1 of 14 1 2 3 4

Search: Search took 0.01 seconds.

  1. Made the upper frame for the door. Test fitted...

    Made the upper frame for the door.

    Test fitted the OEM inner sweeper and side channels.

    I can see that some adjustments will have to be made steel door frame to get the it all to fit correctly...
  2. Thanks Don, gotta love the dust !!

    Thanks Don, gotta love the dust !!
  3. Bloozberry That is a great tip but I didnt have...

    Bloozberry That is a great tip but I didnt have any at the time. What I used as polisocyanuarte foam covered in high temp release film. The foam cuts easily with a razor knife and I grated/sanded...
  4. but wait there's more..... Sand, dyna glass,...

    but wait there's more.....

    Sand, dyna glass, sand rage, rage

    Came out pretty straight

    http://lamboclone.com/index.php?action=dlattach;topic=3575.0;attach=27865;image
    ...
  5. exciting stuff ...... cut, grind, fiberglass...

    exciting stuff ......

    cut, grind, fiberglass fiberglass, grind fiberglass

    http://lamboclone.com/index.php?action=dlattach;topic=3575.0;attach=27851;image
    ...
  6. "NEW" inner doors have a warped bottom. I see...

    "NEW" inner doors have a warped bottom.

    I see fiber glassing in my future.

    http://lamboclone.com/index.php?action=dlattach;topic=3575.0;attach=27832;image
    ...
  7. To get the glass to lay correctly against the...

    To get the glass to lay correctly against the inner door took a lot of sanding. The upper door seal flange also had to be increased.. again
    ...
  8. My gal had a business trip to LA and was able to...

    My gal had a business trip to LA and was able to tag along and stop by and see Murci-Mes G28.

    This is the second time to view the car and it was just as impressive as the first time I saw it...
  9. thanks!! its coming along slowly....

    thanks!! its coming along slowly....
  10. Thanks 20! The REDO will have power windows,...

    Thanks 20!

    The REDO will have power windows, so the next phase will be getting the window tracks and motor in.
  11. Dear God! I spent a ton of time getting the...

    Dear God! I spent a ton of time getting the twisted inner door to lie flush against the door seal http://lamboclone.com/Smileys/default/laughing7.gif It was like reconstructive surgery. Pretty...
  12. These inner doors are a really just POS...

    These inner doors are a really just POS http://lamboclone.com/Smileys/default/laughing7.gif

    It great to have nice straight door flanges for the weatherstrip...
  13. 2obelow, yes I will have to modify the latch a...

    2obelow, yes I will have to modify the latch a bit depending on what locking system I go with. I have some pictures of another members latch set up. But have some other issues to address before I...
  14. Added multiple layers of CSM to the outside of...

    Added multiple layers of CSM to the outside of the door skin. Once close enough to door jam ground inside down to correct thickness.

    Made a one piece plate to mount the Latch to using my plasma...
  15. Bodyman, I just try to keep plugging away at the...

    Bodyman, I just try to keep plugging away at the REDO and try to do it correctly as I go.

    Happy New Year!!
  16. G35 Probably going to make a fiber glass panel...

    G35 Probably going to make a fiber glass panel to bridge the gap between the G28 body and the fiero frame, but that will be later. I did find some water proof high density spray foam that I might...
  17. All flanges on drivers side fixed and seal...

    All flanges on drivers side fixed and seal installed

    http://lamboclone.com/index.php?action=dlattach;topic=3575.0;attach=27449;image
    ...
  18. more exciting stuff on the REDO... front flange,...

    more exciting stuff on the REDO... front flange, thinner than my hair... Just tore it off with my hand. It was good to have the unmolested passenger side as a guide.

    Then all this spray in...
  19. Using the reducible gas shock from McMaster Carr...

    Using the reducible gas shock from McMaster Carr 6465K7 that have been previously mentioned in other posts here.

    These have 13mm ball studs. The REDO had a 10mm mounted on the body. Thought...
  20. I think the REDO on the drivers door is headed in...

    I think the REDO on the drivers door is headed in the right direction.

    Here is a picture of the Old door install before the driver side A pillars width was increased. Alignment not so good.
    ...
  21. Tested to see if the door hit the fender in the...

    Tested to see if the door hit the fender in the raised position. Attached frame to hinge with two spot welds. Then taped the outer skin to the inner

    Test was a success, the outer door skin...
  22. Made the frame for the Door. The old door...

    Made the frame for the Door.

    The old door was attached to the frame in one location, which to me seemed iffy.

    I will be making a frame so the hinge will be attached to the REDO frame on...
  23. To fill the gap between the inner door and the...

    To fill the gap between the inner door and the front seal the door length had to be increased.

    Once a good seal was obtained, the curved piece was fiber-glassed in
    ...
  24. Now that the inner door is pushed back to the...

    Now that the inner door is pushed back to the correct position the issue now moved to the wheel well area. I have a huge gap.

    When compared to the Old doors the shape is completely different.
    ...
  25. Progress on the latch area of the Door. The...

    Progress on the latch area of the Door. The fiberglass where the latch mounts was warped as well.

    It takes time to let the multiple layers of Fiberglass cure. I can see why the PO just loaded...
Results 1 to 25 of 328
Page 1 of 14 1 2 3 4