Page 2 of 6 FirstFirst 1234 ... LastLast
Results 11 to 20 of 51

Thread: G28 - Simple Mans, Simple REDO of an G28 LP640

  1. #11
    this is a picture of the 87 cradle that was in the car... pretty ugly

    http://lamboclone.com/index.php?acti...ch=21743;image
    Last edited by Simple Man; 02-15-2017 at 05:04 PM. Reason: picture link

  2. #12
    mocked it up, about 10.5". A couple of spot welds

    http://lamboclone.com/index.php?acti...ch=21746;image
    Last edited by Simple Man; 02-15-2017 at 05:05 PM.

  3. #13
    test fit, then weld. Had to use a come along to pull the frame in as it was off about 1/2 bolt. The rear of the car has no support beam to hold it in place. One will have to be added

    http://lamboclone.com/index.php?acti...ch=21751;image

    http://lamboclone.com/index.php?acti...ch=21750;image

    http://lamboclone.com/index.php?acti...ch=21748;image
    Last edited by Simple Man; 02-15-2017 at 05:06 PM. Reason: picture

  4. #14
    Took it back out of the car, and check measurements, and finished the stretch. Overall pleased with the outcome.

    Does any diagonal buttress pieces need to be added?

    http://lamboclone.com/index.php?acti...ch=21756;image
    Last edited by Simple Man; 02-15-2017 at 05:07 PM.

  5. #15
    Engine and trans separated and crank nut off!!
    will replace, water, oil pump, alternator, ac compressor, oil pan, crank and various other gaskets. Upgrade headers to pace setter ceramics, smaller pulley, thermostat, plugs and pcm upgrade.

    http://lamboclone.com/index.php?acti...0;attach=21763
    Last edited by Simple Man; 02-15-2017 at 04:54 PM.

  6. #16
    Junior Member
    Join Date
    Sep 2016
    Posts
    1
    Please post some pictures or a link to said pictures, I'm dying to see what your car looks like.

  7. #17

  8. #18
    Cleaned up some of the engine components. Used boiling water bath then aluminum de-greaser, followed up by dawn. Like the transmission, I soda blast them, then metal prep then paint. Obviously the gasket surfaces and or critical areas are protected from blasting.

    http://lamboclone.com/index.php?acti...ch=21824;image

    http://lamboclone.com/index.php?acti...ch=21827;image

    http://lamboclone.com/index.php?acti...ch=21829;image

  9. #19
    Made some sheet metal pieces for the stretch area and sprayed the fire wall with Lizard Skin - sound. I really like this product, so much easier than dyna matt or an equivalent product. Will spray the Lizard Skin Heat shield tonight.

    http://lamboclone.com/index.php?acti...ch=21831;image

    http://lamboclone.com/index.php?acti...ch=21833;image

    http://lamboclone.com/index.php?acti...ch=21835;image

  10. #20
    Quote Originally Posted by madtouareg View Post
    Please post some pictures or a link to said pictures, I'm dying to see what your car looks like.
    photobucket please. post some pics instead of links
    Yellow Vetter Carrera Gt-boxter based
    White Vetter Murcielago-boxter based
    White Gagliardi Vendetta
    Gemballa avalanche 911

    Team Mad Mechanics 2016

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •