Results 1 to 1 of 1

Thread: Build Your Own Racecar Frame Start Here

  1. #1
    Member rapid transit's Avatar
    Join Date
    Dec 2011
    Location
    california
    Posts
    95

    Build Your Own Racecar Frame Start Here

    Here are some ideas to get your frame design plans going.

    1 Lay out the bottom loop.

    Bottom loop can be irregular.One width for front subframe, another width for cockpit and another width for rear suspension subframe.

    2 Lay in the steering column support hoop.Add firewall hoop. Should give you a cowl area between two hoops.

    3 Rear cockpit hoop/rollbar.

    That should define the dimensions of the cockpit.

    Build UP from the bottom main loop to locate these other items:

    Engine/tranny brackets, front suspension mount points and rear suspension.

    Tie together with longitudinal and cross braces.

    Make the side of frame 18-24" tall. That far above bottom loop.

    PM me with any questions on how to get started.
    Last edited by rapid transit; 11-04-2018 at 09:05 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •