Results 1 to 10 of 10

Thread: HELP!!

  1. #1
    Junior Member bomaze's Avatar
    Join Date
    Apr 2004
    Posts
    18

    HELP!!

    I am looking for any info on how to get a passenger side rear CV half axle for a CK3 512TR replica. It is based on an 86 Fiero. I have looked at OEM parts to replace it but the axle for an automatic is too short and the one for a manual is too long. The damaged half axle has a length of 30" overall. Is there any other half axles with 33/34 splines that you guys can recommend? Any help would be greatly appreciated. Any CK3 owners please chime in.

  2. #2
    Senior Member ITALIANKNIGHTRIDER's Avatar
    Join Date
    Jan 2005
    Location
    Tx
    Posts
    2,995

    Re: HELP!!

    not enough info is it a stock engine an trans ,is it a 4t60 trans ,it could be Custom or mini van conversion , or Cadillac
    In the USA if you pay a company / person to start a plug, then it,s your plug and work ,it is not theirs to sell or trade !!

  3. #3
    Junior Member bomaze's Avatar
    Join Date
    Apr 2004
    Posts
    18

    Re: HELP!!

    Sorry about that, it is a stock V6 and transmission.

  4. #4
    Junior Member bomaze's Avatar
    Join Date
    Apr 2004
    Posts
    18

    Re: HELP!!

    Can anyone recommend a good place to get a custom drive axle built?

  5. #5
    Senior Member
    Join Date
    Feb 2009
    Posts
    152

    Re: HELP!!

    speak with Eric at http://www.westshorefabricators.com/ He should be able to help

    If not then you can speak with west coast fiero below is how they make custom axles

    http://www.westcoastfiero.com/axles/axles.html

    good luck!

  6. #6
    Junior Member bomaze's Avatar
    Join Date
    Apr 2004
    Posts
    18

    Re: HELP!!

    Thank you so much for the info!! ;D

  7. #7
    Junior Member bomaze's Avatar
    Join Date
    Apr 2004
    Posts
    18

    Re: HELP!!

    Shipped my axle off today, I will have a custom one made and sent back next week! Thanks again for all of the help!!

  8. #8
    Junior Member bomaze's Avatar
    Join Date
    Apr 2004
    Posts
    18

    Re: HELP!!

    Thanks to your help on this forum, I have a new axle and I am back on the road.
    Thanks

  9. #9
    Senior Member
    Join Date
    Feb 2009
    Posts
    152

    Re: HELP!!

    Glad to hear it all worked out, who finally was able to help you? Eric at HELD?

  10. #10
    Junior Member bomaze's Avatar
    Join Date
    Apr 2004
    Posts
    18

    Re: HELP!!

    Yes, Eric gave me the number of Mr. Axle in Muskegon, MI and their service was top-notch!! They delivered a great finished product with a real fast turn around. When the season is over I am planning on getting the driver side axle custom made with sturdier parts. For the price and the great service it is a no-brainer.
    Thanks again for pointing me in the right direction!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •