Results 1 to 8 of 8

Thread: middle console measurements LP640

  1. #1

    middle console measurements LP640

    hello all, i am looking for the physical measurements of the center console that is tapered (or wider) near the rear firewall instead of the big rectangular box included with the g28L kit from our friends in Alabama.

    the front,rear width height and length of the arm rest.
    the dimensions of the plate that the gear shift, window switches etc mount on/through.

    thank you for your time in advance.

  2. #2
    Senior Member
    Join Date
    Jun 2008
    Posts
    779

    Re: middle console measurements LP640

    Oem is too big for a fiero, just make it look oem and keep it tight to the seats

  3. #3

    Re: middle console measurements LP640

    i am using a tube chassis...lots of room to work with...

    but thanks for the info !

  4. #4
    Senior Member
    Join Date
    Jun 2008
    Posts
    779

    Re: middle console measurements LP640

    ask lambo lambo he has oem

  5. #5

    Re: middle console measurements LP640

    @tallon

    i made my own revisions to the chassisworks frame, as that is what i am using also.
    the dash, the door sill supports, the front rear bumper/frame mounts etc. all custom but based on the actual lp640 frame as i don't have any of NAERC plans available to me.

    talking to mike about it he said he left these parts open to be modified to suit as every kit is different even if its the same one...

    (that made sense in my head...)

    i ended up using a Porsche boxster steering rack and steering column which meant my water cut dash parts didn't get used.

    so far as space, i would say there is plenty to work with, i have just mounted the clutch and brake pedals and although it looks tight, it all fits without any issues.

  6. #6
    Senior Member Jets303's Avatar
    Join Date
    Aug 2009
    Location
    Denver
    Posts
    686

    Re: middle console measurements LP640

    Quote Originally Posted by Greenmeansgo
    Oem is too big for a fiero, just make it look oem and keep it tight to the seats
    The OEM one just needs to be trimmed, you can use it

  7. #7

    Re: middle console measurements LP640

    Now if i only had the measurements of that OEM... ;D

  8. #8

    Re: middle console measurements LP640

    I actually had pictures of the frame from the net and one that went on Ebay a while back.
    from those i scaled out the additional frame parts to fit my body from the original CW chassis.
    there are also pictures of the NAERC frame from the car shows it was in a few years back.
    so even though the additions i have added are not exact, they are exact for my frame and build.
    when i get a little farther and get all the pictures of the build secured together i will release my build post.
    im still pretty new here and need time to stabilize and organize !!
    feel free to PM me.

Similar Threads

  1. Replies: 1
    Last Post: 06-22-2011, 06:20 AM
  2. LP640 door striker location measurements
    By Jimbo6.0 in forum Technical Discussion & Question
    Replies: 3
    Last Post: 07-26-2010, 09:54 AM
  3. Murcielago lp640 carbon fiber center console faceplate
    By gegamgasparian in forum The Mall
    Replies: 10
    Last Post: 01-09-2010, 01:08 AM
  4. Fiero chassis measurements for an LP640 -Hughes
    By Hughes in forum Technical Discussion & Question
    Replies: 0
    Last Post: 07-18-2009, 03:53 PM
  5. Looking for LP640 seat measurements
    By TOMMYTREETRUNK in forum Technical Discussion & Question
    Replies: 17
    Last Post: 10-05-2008, 11:00 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •