Results 1 to 6 of 6

Thread: Help with axles.... Porsche 915 to C4 hubs

  1. #1
    Senior Member Bottlefed's Avatar
    Join Date
    Oct 2010
    Posts
    378

    Help with axles.... Porsche 915 to C4 hubs

    Now looking to get half shafts. Im looking for sources to either buy new shafts, or have the inner end modified to fit the 915 flange. Any help would be greatly appreciated... Thanks In advance

  2. #2
    Senior Member
    Join Date
    Apr 2010
    Posts
    398
    The Driveshaft Shop | Home page
    My Race Shop

    Does the C4 use CV joints or u-joints?

  3. #3
    Senior Member Bottlefed's Avatar
    Join Date
    Oct 2010
    Posts
    378
    The c4 uses u joints

  4. #4
    Senior Member
    Join Date
    Apr 2010
    Posts
    398
    It is not a good idea to have a CV joint on one end and a U-joint on the other. U-joints need to be used in pairs so that one cancels the pulses of the other. Look for a stub axle that will fit the C4 hub that has a CV joint flange, myraceshop.com may have them, or I make adapters for that. Then have an axle made to the right length.

  5. #5
    Senior Member Bottlefed's Avatar
    Join Date
    Oct 2010
    Posts
    378
    sweet... Thanks for the info. can you tell me more about these adapters

  6. #6
    Senior Member
    Join Date
    Apr 2010
    Posts
    398
    PM sent......

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •