Results 1 to 4 of 4

Thread: Widetrack Suspension with different bolt pattern and Brake upgrade

  1. #1
    Junior Member
    Join Date
    Oct 2008
    Posts
    13

    Question Widetrack Suspension with different bolt pattern and Brake upgrade

    So if I want to widen my front suspension on a 85 fiero with
    a C4 brake upgrade and a different bolt pattern wheel like for example
    from the 5 x100 to 5x112 what is the best route to do this?

  2. #2
    Senior Member
    Join Date
    May 2007
    Posts
    1,453
    I don't know if it's the "best" way, but I'm going with a wide track front and rear suspension from Held, and having my Fiero rotors/hubs machined down to where the C4 rotors fit over the top of them, and then going with heavier rated springs to make up for the extra weight of keeping the Fiero hub and the heavier Corvette rotors. I purchased the C4 brake upgrade hardware from WCF that had the caliper adapters and the hub centric rings for the rotors. I'm also keeping the 5x100 lug pattern as I have some cool wheels that will fit already.

  3. #3
    Talk to the Guys @ West Coast Fiero...

  4. #4
    Junior Member
    Join Date
    Oct 2008
    Posts
    13
    How about going with S10 hubs ? will they still have to be machined to fit the c4 rotor
    for the front and rear? anyone tried that method?

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •