Page 1 of 2 12 LastLast
Results 1 to 10 of 18

Thread: Rear Coilover for 1986 2.8 fiero Testarossa replica

  1. #1
    Senior Member CHRISTOPHE de France's Avatar
    Join Date
    Jan 2013
    Location
    Nīmes FRANCE
    Posts
    168

    Rear Coilover for 1986 2.8 fiero Testarossa replica

    Hello friends.


    I want a solution for several days.


    I would ... purchased together.
    Do not assemble myself as to bring all the different rooms in France, it is very difficult, so if I bought a set fitted with KYB amotiesseur like for example, I have no risk error.
    I have found this in the US, ...http://www.arrautmotorsports.com/parts/suspensions
    (look picture) Step 4. F001
    over conversion kit with KYB Struts for your standard track width 1984 – 1987 Fiero
    F001 & 1 Pair of KYB Struts


    I wrote 3 times, no answer.
    Do you have addresses?
    I followed the advice of friend Bob (RCR), Pennock and looked on, but they often make the assembly, and I do not know how to buy the one corresponding parts others (springs, tube ....) especially we, in France, we are with the metric system, we do not have the same Units of measure you ..... this is very complicated.
    My rear shock absorber assembly is original, the springs have been cut.
    I do not want it on my car.
    Thank you for your help if you have a seller for rear coilover.

    Look at this post to see the car:

    http://www.madmechanics.com/forum/bu...ntation-6.html

    Best regards

    Christophe.

  2. #2
    Senior Member CHRISTOPHE de France's Avatar
    Join Date
    Jan 2013
    Location
    Nīmes FRANCE
    Posts
    168
    I contacted JEGGS the USA, I hoped that they will respond.


    No one to tell me the parts that I buy scaffold for making coil-over rear of my car?


    Fiero a 1986 2.8 V6




    From KYB shock?


    With 300lb springs ?


    I have no dimension, and so I very afraid of the séparéments purchased parts.


    If anyone knows this and can tell me, thank you really.


    In Europe, there is nothing.


    See you soon.


    Christophe.
    Last edited by CHRISTOPHE de France; 03-30-2016 at 03:19 PM.

  3. #3
    Member
    Join Date
    Mar 2016
    Location
    Northern California
    Posts
    46
    My nephew's company supplies US car parts to european distributers. I checked and he said he has a couple in France. If you want to give me your city he can give you the closest one if you think that would help.

    Ok, sorry I reread your post, that won't help. I found these rear coil over sleeves that are available for the Fiero. Is this what you are looking for?

    If you need help shipping international, my nephew might be able to help.

    Rick
    Last edited by ricand; 03-30-2016 at 11:37 AM. Reason: Reread post don't think it would help sorry.

  4. #4
    Member
    Join Date
    Mar 2016
    Location
    Northern California
    Posts
    46
    Quote Originally Posted by CHRISTOPHE de France View Post
    Hello friends.


    I want a solution for several days.


    I would ... purchased together.
    Do not assemble myself as to bring all the different rooms in France, it is very difficult, so if I bought a set fitted with KYB amotiesseur like for example, I have no risk error.
    I have found this in the US, ...http://www.arrautmotorsports.com/parts/suspensions
    (look picture) Step 4. F001
    over conversion kit with KYB Struts for your standard track width 1984 – 1987 Fiero
    F001 & 1 Pair of KYB Struts
    I wrote 3 times, no answer.
    Do you have addresses?
    According to their Facebook page they will be gone for the entire month of March. They assure everyone they will get back to all inquiries when they get back. You should hear back from them in the next couple days.

  5. #5
    Senior Member CHRISTOPHE de France's Avatar
    Join Date
    Jan 2013
    Location
    Nīmes FRANCE
    Posts
    168
    Thank you Ricand, I had not thought about facebook .... I am not on this site, I will ask my daughter to watch.


    Thanks for your help.

  6. #6
    Senior Member CHRISTOPHE de France's Avatar
    Join Date
    Jan 2013
    Location
    Nīmes FRANCE
    Posts
    168
    I just got a answer from Richard to Arraut Motorsports, he will take care of me.
    Thank you very much Ricand, for your help.

  7. #7
    Senior Member CHRISTOPHE de France's Avatar
    Join Date
    Jan 2013
    Location
    Nīmes FRANCE
    Posts
    168
    Hello friends, I found the solution in Arraut Motorsports. http://www.arrautmotorsports.com/parts/suspensions
    I wrote to Richard Arraut ,he told me very good advice for my car, and sending me this in France. A big thank you to him and all of you for your help.
    see you soon.
    Attached Images Attached Images   

  8. #8
    Senior Member CHRISTOPHE de France's Avatar
    Join Date
    Jan 2013
    Location
    Nīmes FRANCE
    Posts
    168
    Hi,

    My convertion Kit arrived today in my home.
    Very beautiful parts.
    Arraut Motorsports is a very professional company.
    Attached Images Attached Images    
    Last edited by CHRISTOPHE de France; 04-22-2016 at 03:48 PM.

  9. #9
    Senior Member CHRISTOPHE de France's Avatar
    Join Date
    Jan 2013
    Location
    Nīmes FRANCE
    Posts
    168
    As soon as I have time I'll cut the Monroes rear shock absorber to receive the coil-over spring system.
    I have a manual supplied with the kit.
    I will show you the result.


    see you soon .


    Christophe.

  10. #10
    Senior Member murcie-me's Avatar
    Join Date
    Jul 2007
    Location
    Chatsworth, CA.
    Posts
    1,748
    Did they say what the pound rating was of the rear springs? I need new ones for my car but have no idea which to get.
    Without talent experience is worthless

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •