Page 1 of 2 12 LastLast
Results 1 to 10 of 18

Thread: Need help with RIMS

  1. #1
    Junior Member
    Join Date
    May 2005
    Posts
    5

    Need help with RIMS

    Three sets of rims:

    What are they, what size are the tires, where can I get the rims and how much are they?

    I think the first set are ROH ZS







    Thanks

  2. #2
    Senior Member
    Join Date
    Jan 2004
    Location
    Upstate NY
    Posts
    1,066

    Re: Need help with RIMS

    ....the 2nd set are Ferrari factory rims for the F355...they come up on eBay every once in a while $1,500 - $2,500 depending on used condition...I think they are made by BBS.

    The 3dn set looks like ADR wheels to me but I can't be sure....maybe 17" wheels or larger

    VK
    Life is too short to be driving Hondas!

  3. #3
    Senior Member sactodreamer's Avatar
    Join Date
    Oct 2003
    Location
    Sacramento, CA
    Posts
    2,267

    Re: Need help with RIMS

    I think goyal99 is right on which wheels those are. I don't know how much the ROH wheels cost, real 355 wheels will run around $2K, and I think ADRs are around $1,500. Another option would be these HP racing wheels which a couple of us are using, they cost me around $640 shipped for all four.



    One of these days I'll get it out of the garage to get a better picture of it.

  4. #4
    Senior Member
    Join Date
    Dec 2001
    Posts
    631

    Re: Need help with RIMS

    I used the ROH ZS.
    I just checked the price on the wheels: $726.00 for all four wheels.
    I bought mine from:
    http://www.jdwheels.com/roh.htm

    Front: 17x7.5 5x114.3
    215/40 WR17 Yokohama A520
    38mm+ offset with a 2.25 inch spacer/adapter

    Rear: 17x9.5 5x114.3
    275/40 ZR17 Yokohama A520 (could have used a taller tire)
    20mm+ offset with a 2 inch spacer/adapter (I could have used a little wider rear spacers)

    I had the adapters made with half inch studs.


  5. #5
    Senior Member
    Join Date
    Aug 2003
    Posts
    1,103

    Re: Need help with RIMS

    Mark: sorry to sidetrack the topic,, My car is in the paint shop Finally! on your car, the lower body line is it pinstriped
    or just cut a bit wider? it looks nice and crisp. I'm going to re cut mine but wanted it to look nice and clean like yours.
    thanks

    David
    Just smart enough to be very Dangerous

  6. #6
    Senior Member
    Join Date
    Dec 2001
    Posts
    631

    Re: Need help with RIMS

    I know you are excited, paint is a big step. You will get even more excited when you get it back.

    I used just pinstripes on the lower body line. They were added to other parts of the car also, like around the rear light pannel. The rear bumper and front fascia.

  7. #7
    Senior Member
    Join Date
    Aug 2003
    Posts
    1,103

    Re: Need help with RIMS

    Its going to take a while but yeah, I'm really excited.. is the lower body line on your car still there tho?? I was thinking of adding the pinstripe also. looks good man!
    Just smart enough to be very Dangerous

  8. #8
    Moderator FunnyWheels's Avatar
    Join Date
    Nov 2002
    Location
    Tampa, FL
    Posts
    8,151

    Re: Need help with RIMS

    Quote Originally Posted by bigdaddyo
    Three sets of rims:

    What are they, what size are the tires, where can I get the rims and how much are they?

    I think the first set are ROH ZS

    Thanks
    I have information on real 355 rims. One front rim new is $1,583 plus shippong the rear is $2,345 plus shipping. I have two front rims and one rear available. One front rim is new and never mounted, one front is used but in ok condition. The rear rim has a tire mounting mark and can be refinished easily.

    If you can locate another rear rim you could have a complete set.

    The center caps are $65 each at Ferrari of Atlanta and $37 each at T-Rutlands, Tucker, Georgia.

    Dave
    If you're not confused, you're not paying attention.

  9. #9
    Senior Member Mr355's Avatar
    Join Date
    Jun 2002
    Posts
    850

    Re: Need help with RIMS

    Love that spider. Is that a Ferrari factory color?

  10. #10
    Senior Member
    Join Date
    Feb 2003
    Location
    Texas
    Posts
    372

    Re: Need help with RIMS

    Quote Originally Posted by Spyder
    I used the ROH ZS.
    I just checked the price on the wheels: $726.00 for all four wheels.
    I bought mine from:
    http://www.jdwheels.com/roh.htm
    thanks for the link.
    i think i might get these. i wish i knew how to photoshop. like to see these
    on a 355 to make sure they look good.


Similar Threads

  1. Hole Rims MR2 versus Hole Rims F355
    By carloscostoya in forum Technical Discussion & Question
    Replies: 3
    Last Post: 11-06-2006, 09:13 AM
  2. 355 rims
    By spider1 in forum Technical Discussion & Question
    Replies: 5
    Last Post: 01-07-2006, 10:16 PM
  3. RIMS
    By fastlap36 in forum Technical Discussion & Question
    Replies: 2
    Last Post: 08-29-2005, 03:34 PM
  4. Shiny 20" rims or stock 355 rims?
    By MAD in forum General Kitcar Chat
    Replies: 11
    Last Post: 05-08-2005, 08:06 PM
  5. Rims for the 355
    By KillerX in forum Technical Discussion & Question
    Replies: 38
    Last Post: 05-18-2004, 10:01 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •