Results 1 to 8 of 8

Thread: roller rockers for fiero V-6

  1. #1
    Senior Member murcie-me's Avatar
    Join Date
    Jul 2007
    Location
    Chatsworth, CA.
    Posts
    1,748

    roller rockers for fiero V-6

    Does anybody know who makes roller rocker arms (1.6 ratio) that fit a Fiero 2.8L V-6. The set I bought that were supposed to fit, dont,- they're to wide to fit next to each other. Any help would be greatly appreciated :
    Without talent experience is worthless

  2. #2

    Re: roller rockers for fiero V-6

    Quote Originally Posted by murcie-me
    Does anybody know who makes roller rocker arms (1.6 ratio) that fit a Fiero 2.8L V-6. The set I bought that were supposed to fit, dont,- they're to wide to fit next to each other. Any help would be greatly appreciated :
    My set is from Crane Cams they were not cheap I called them told them what I wanted then got the part number and ordered them from Summit I know but for some reason they were a little cheaper if I did that then Summit had them drop shipped to me. they are going on my turbo 3.4 I'm building I have modified heads with the bigger 3.8 SC valves installed

    www.kikkerbikes.com
    www.kikkerbikes.com

  3. #3
    Moderator FunnyWheels's Avatar
    Join Date
    Nov 2002
    Location
    Tampa, FL
    Posts
    8,151

    Re: roller rockers for fiero V-6

    I would check with the Fiero Forum on Yahoo. There is a guy named Dana on there who knows quite a bit about them. He is building a 3.1 with a bunch of goodies on it including roller rockers. Maybe you purchased the wrong set?
    If you're not confused, you're not paying attention.

  4. #4
    Senior Member murcie-me's Avatar
    Join Date
    Jul 2007
    Location
    Chatsworth, CA.
    Posts
    1,748

    Re: roller rockers for fiero V-6

    ;D Thanks for all the leads guys, they really helped! I finally went with the COMP CAMS 1.6 roller rockers (P/N 1416-16) purchased at PAW for $165. I had to change the stud size from the stock 10mm to 3/8", which I bought through SUMMIT. The results are amazing! much quicker revving,louder-deeper exhaust note,and a noticable increase in HP. I dont know how much it is attributed to just the rocker arms though. I also removed the restrictions in the exhaust manifolds,and had the injectors blueprinted. All in all, I'm very happy with the results, it definately was worth the time and money to do it. ;D
    Without talent experience is worthless

  5. #5

    Re: roller rockers for fiero V-6

    this might work but it is a picture of the turbo 3.4 I am building at this time has the crane rockers on it
    http://upload2.postimage.org/604837/photo_hosting.html
    www.kikkerbikes.com

  6. #6

    Re: roller rockers for fiero V-6

    Something else I did was have 3.8 SC bigger valves put in my heads
    http://upload2.postimage.org/568943/photo_hosting.html
    and ported them
    http://upload2.postimage.org/568944/photo_hosting.html
    www.kikkerbikes.com

  7. #7
    Senior Member
    Join Date
    Oct 2004
    Posts
    723

    Re: roller rockers for fiero V-6

    Hey FF3 if you don't mind me asking how much you got into that engine rebuild?

    RUNDLC

  8. #8

    Re: roller rockers for fiero V-6

    Quote Originally Posted by rundlc
    Hey FF3 if you don't mind me asking how much you got into that engine rebuild?

    RUNDLC
    Don't know I just keep throwing money at it and it takes it like a hungry dog takes a biscuit. I would guess off the top about 3k
    www.kikkerbikes.com
    www.kikkerbikes.com

Similar Threads

  1. So You Want Solid Rockers...Here’s How!
    By Spyder in forum General Kitcar Chat
    Replies: 17
    Last Post: 06-18-2007, 08:48 PM
  2. kit with separate rockers on da Bay
    By Modena in forum The Mall
    Replies: 26
    Last Post: 12-23-2005, 06:27 PM
  3. 355 split rockers
    By 355west in forum General Kitcar Chat
    Replies: 2
    Last Post: 04-07-2005, 08:35 PM
  4. MOVED: kit with separate rockers on da Bay
    By MadMechanic in forum Technical Discussion & Question
    Replies: 0
    Last Post: 01-09-2005, 10:30 PM
  5. Making seperate Rockers???
    By drewg in forum Technical Discussion & Question
    Replies: 7
    Last Post: 05-19-2003, 04:50 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •