Announcement

Collapse
No announcement yet.

I got the axle seal in!!!

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • derwin
    replied
    Re: I got the axle seal in!!!

    I think I may have used a end connector rather than the pipe
    since..indeed it has to be straight.

    Leave a comment:


  • MadMechanic
    started a topic I got the axle seal in!!!

    I got the axle seal in!!!

    Well, after many, many hours of work and two broken seals I THINK I got the axle seal properly... Took a piece of PVC pipe and had it cut at home depot perfectly straight(very important). Removed the whole rear spring/shock assembly. Put the pipe over it and using a sledge hammer wacked it until it was in nice and tight. I also put the rebuilt axle in. Now I need to just reconnect the control arm to the spring/shock assembly as well as replace the toe link rod.

Unconfigured Ad Widget

Collapse
Working...
X