Ferrari F40

[Don]

Raf007;

I made up a set of instructions and posted here in the link below on how to have pics in your threads.

Cheers
Don

http://www.madmechanics.com/forum/ge...-patron-7.html

[WadeROTH]

One of the best sport cars of all times

[Raf007]

I would post some pictures but I don’t know how 🤦*♂️🤦*♂️🤦*♂️

[Raf007]

Also getting on with my own one it’s on four wheels and have mounted the front clip, I have modified mine to be like the LM version with fixed lights, it’s starting to take shape 😊😊😊

[Raf007]

F40

Hi all I’m now in the position to supply some body panels to build an F40 replica if anybody is interested the donor car bing an MR2

[Raf007]

Hi all I’m now in the position to supply some body panels to build an F40 replica if anybody is interested the donor car bing an MR2

[stevep914]

F40

I’m going to use the Audi V8 with an 01e gearbox, I have measured it and it seems ok, I intend to start this work after Christmas, at the moment doing the suspension

Raf, I have emailed you some current pictures of my car. A decent example of a Fiero based F40 with a fair bit of customizing. It has real Veglia 328 gauges in it, and an interior in leather; gray suede and red seats with the Ferrari logo embroidered on the headrests. Drives solid at high speed due to lowered stiff suspension, although harsh on our less than stellar roads down here. Steve

[Raf007]

I’m going to use the Audi V8 with an 01e gearbox, I have measured it and it seems ok, I intend to start this work after Christmas, at the moment doing the suspension

[4themasses]

Hi just recently joined this forum and am about to start building an F40 replica and advice would be welcome and parts ,I'm building mine using a 308 chassis which I have and for now I'm going to run an Audi v8 with a 01e gearbox,that's where I am at the moment. Raf

What can you tell us about the drive train your planning. It seems the back of the F40 is so short it's very limited to the trans choices.

[4themasses]

I had posted a lot about my F40 originally, as I was going through an importation nightmare, getting it into Mexico from Canada. Got that done after 3 years stuck at the US/ Mexico border. After that spent 3 years reworking the wiring and redoing the interior ( mice got at it while it sat outside in a storage compound.) Is looking and driving very good now, but needs a new rear stepglass, and THAT has become a big problem ( see my post on Consumer Opinions) I will say that driving it is a blast, and the attention it gets here can be overwhelming. Nobody has ever seen one here. Being an ex SCCA racer, this car makes me want to take it up and track it at Brainerd on the 3 mile track I used to race at. It is stuck on rails with the stiff suspension and wide tires. Just a note: mine has 16 inch rims, and you will NOT find the 315/40R 16 tires for the rear anywhere anymore. You will have to go to 17 or larger rear rims. Can still get the 245 fronts on 16 inch. My advice: go for it! A lot of work, but the end result will make you proud! Steve

What a nightmare Steve! Glad it worked out for you. I seen you been trying to find a rear window. Hope you can get ahold of one. I think 18's would be a good size and tire options. The Gas Monkey F40 looked good with that size.

[4themasses]

Great to see plasticfantastic in here! Read a lot on your build.

Raf...I think I can pick this thing up for under 3 grand, maybe 2. It has sat a long time. Kinda discarded. It's not in terrible shape but typical US F40 kit. Nose needs corrected (shortened) so I'd tube the front with a shorter one and cut up the nose to fit. Design a new rear frame also. It's 350 converted but I got an idea for a 3.0 V6 twin turbo from a Mitsu VR4. Just checking into everything b4 I decide to buy it. Chances are I will.

[stevep914]

Raf, I am not good with computers! Pm me your email address, and I will send you some pictures of mine. Steve

[Raf007]

Oh yes I’m well into it Steve, can’t wait ��������, any pictures off yours ?

[Raf007]

Hi so your going to get a Fiero based F40,do you mind me asking what sort of price you have to pay for one also you mentioned extensive modifications, would you not consider building your own one ? , where are you based. I picked up my 308 chassis in England and I think it’s possible to get another if you’re interested. I start having the suspension built this weekend and my wheels have just arrived today.

[plasticfantastic]

Hi all,

I'm still around! And my project continues, I've been back onto it lately now the weather is getting worse!

I'm currently working on the front end fitment and front inner wheel tubs.

Cheers