Announcement

Collapse
No announcement yet.

Rear suspension problem!!!! Need help!!!!

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    Re: Rear suspension problem!!!! Need help!!!!

    sounds like the difference is 3.612" for the S10 and 3.544" hole in the upright.

    I suggest machining out the opening to accept the new bearing.
    At that point I would be very interested in see if the mounting holes line up.

    dave

    Comment


    • #17
      Re: Rear suspension problem!!!! Need help!!!!

      I will remove my rear wheel to get the part numbers for you. I did not modify my upright. The measurement for the S-10 was the same as the upright. The only thing necessary was to drill out the threads on the S-10 Hub. The part numbers will provide that information fo you.

      Dave
      If you're not confused, you're not paying attention.

      Comment


      • #18
        Re: Rear suspension problem!!!! Need help!!!!

        thanks Dave... once I get that part number, I can check the measurements on it and see how things go together.

        dave

        Comment

        Unconfigured Ad Widget

        Collapse
        Working...
        X