Announcement

Collapse
No announcement yet.

Complete brake upgrade package 13" fronts and 12" rear

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Complete brake upgrade package 13" fronts and 12" rear

    Up for sale is a complete brake upgrade for a 1984 tp 1987 Fiero.
    The following is a list of all parts included in the package. Rotors are drilled for 5x100 bolt pattern. Everything was installed except the park brake cables but is still new never driven.


    -Front rotors 2004 CHEVROLET CORVETTE 5.7L V8
    POWER STOP K1559 {#BK967223} Z23 Evolution Sport; Incl. 12.81 in. Silver Zinc Plated Cross-Drilled And Slotted Rotors w/ Z23 Evolution Pads; Incl. Hardware
    Flag indicates this part fits vehicles sold in the US Market. It does not indicate where the part was made -- manufacturers produce parts in multiple factories worldwide. Flag indicates this part fits vehicles sold in the Canadian Market. It does not indicate where the part was made -- manufacturers produce parts in multiple factories worldwide.


    -Rear Rotors 1990 CHEVROLET CORVETTE 5.7L 350cid V8 DOHCPOWER STOP K1523 {#BK572501} Z23 Evolution Sport; Incl. 12.01 in. Silver Zinc Plated Cross-Drilled And Slotted Rotors w/ Z23 Evolution Pads; Incl. Hardware
    Flag indicates this part fits vehicles sold in the US Market. It does not indicate where the part was made -- manufacturers produce parts in multiple factories worldwide. Flag indicates this part fits vehicles sold in the Canadian Market. It does not indicate where the part was made -- manufacturers produce parts in multiple factories worldwide. Rear; w/Heavy Duty Suspension


    -Front Calipers are remans for C5
    -Rear Calpers are Remans for C4


    -Brackets are from doublec4Embrace Racing 13" C5 front brake brackets allow you to fit your Fiero with 13" Corvette front brakes (calipers and rotors) from the fifth generation Corvette (1996-2004) or the sixth generation Corvette (2005-2013) base model (NOT Z51/Z06/ZR1).


    These brackets are made from 6061 Aluminum to keep unsprung mass to a minimum. The raised bosses are TIG welded into place to ensure maximum strength and rigidity. The design of these brackets allows you to retain full steering wheel travel from full lock to lock with no interference with suspension components. The C5 calipers will also interface with your stock brakes lines without modification.


    In order to utilize these brackets, you will need the following hardware to bolt to your stock front spindles and to the C5 abutment brackets. This hardware is included!!!


    -(4) M14 x 40 hex bolts Grade 10.9
    -(4) M12 (1.75 thread) x 30 hex bolts Grade 10.9


    -also included are the NIB park brake cables for the 12" Vette Park brake cable conversion done by "AL68" with the Bubbajoe rear brackets.
    part numbers are Raybestos BC93218 and BC93220, 84-87 Vette rear cables.


    Price of everything came to $948 plus $110 shipping total $1058
    I'll let it go as package only for $800 plus shipping a great deal for some one looking for a complete upgrade.
    Attached Files

Unconfigured Ad Widget

Collapse
Working...
X